Fixing A Welding Machine With Cooling Module - EWM Trolly 35.2-2 Operating Instructions Manual

Design and function
Mounting the machine
Item Symbol
3
4
•
Place the welding machine with its feet in the holes provided.
•
Lower machine hold-down fitting onto the handle of the power source.
•
Secure the machine hold-down fitting using star handles.
5.2.2

Fixing a welding machine with cooling module

The illustration serves as an example only.
Item Symbol
1
2
3
4
5
•
Place the cooling unit with its feet in the recesses provided.
•
Connect the welding machine with the cooling unit. (See operating instructions for cooling unit/power
source)
•
Lower machine hold-down device to the handle of the power source.
•
Secure the machine hold-down device using star knobs.
18
Description 0
Plain washer
M5
Star handle
M8x20
Description 0
Cooling unit
Power source
Plain washer
M5
Star handle
M8x20
Cross arm
Upper device attachment
Figure 5-4
099-008296-EW501
23.02.2021