Jansen IKT 604 S P CEC Handling And Installation Instructions page 33

Typ X3
60 600 mm
80 800 mm
Bracket
• Insert the hob and align it.
• From the bottom, insert the brackets with screws in
the holes provided for fastening the brackets, align the
brackets and screw them tight.
• Tighten the screws with a hand screw driver only; do
not use a battery-operated screw driver.
• In the case of thin worktops make sure that the bra-
ckets are correctly positioned.
Instructions for assembly
X2
560 mm
750 mm
X2
Important:
There is a risk of breakage if the hob is canted or subjec-
ted to stress during installation!
Minimum distance to adjacent walls
Cut-out dimension
Outer dimensions of the hob
Cable routing in rear wall
Installation height
GB
33