Furuno FAR-2218 Operator's Manual page 4

No. Control Name
1, HL OFF key
2, EBL OFFSET key
6
3, MODE key
4, OFF CENTER key
5, CU/TM RESET key
6, INDEX LINE key
7, VECTOR TIME key
8, VECTOR MODE key
6
9, TARGET LIST key
CANCEL TRAILS key
0, BRILL key
ENTER MARK key
MENU key
RANGE controls
ACQ key
7
TARGET DATA key
TARGET CANCEL key
ALARM ACK key
8 Right mouse button
• With the menu open: Select menu item "1".
• Press and hold to hide the heading line. Release to re-show the heading line.
• With the menu open: Select menu item "2".
• Sets the positive/negative value to "+".
• Offset or reset the EBL.
When the MODE key is set to ORIENTATION:
Change the orientation mode.
When the MODE key is set to CURSOR/DISPLAY:
• With the menu open: Select menu item 3.
• Show/hide the cursor.
• With the menu open: Select menu item "4".
• With the cursor shown: enable or disable off-center.
• With the cursor hidden: move the screen center (OS position).
• With the menu open: Select menu item "5".
• Course Up mode: Reset the heading line to 000°.
• True Motion mode: Move Own Ship position 75% of the radius in opposite direction of
the current heading.
• With the menu open: Select menu item "6".
• Short press: Select a PI line.
• Long press: Show or hide the selected PI line.
• With the menu open: Select menu item "7".
• Change the vector time.
• With the menu open: Select menu item "8".
• Sets the positive/negative value to "-".
• Toggle between true and relative vectors.
• With the menu open: Select menu item "9".
• Show or hide the TT/AIS target list.
Without the menu open:
• Short press: Change the trail display time.
• Long press: Erase displayed trails.
With the menu open:
• Go back one level in the menu. Closes the menu if the top level is displayed.
• Cancel changes made to a menu setting.
• With the menu open: Select menu item "0".
• Change the color scheme.
Inside the Operational Display Area (ODA):
Inscribe a mark.
With the menu open:
Confirm changes, open the selected menu.
Open or close the menu the menu.
Note: The MENU key will not open/close the menu in the following situations:
• VRM or EBL is being set.
• DROP MARK or MARK is being inscribed.
• Alarm Zone (AZ) or TARGET ALARM is being set.
Increase or decrease the range.
• Manually acquire the cursor-highlighted target for Target Tracking (TT).
• Show the information for the cursor-highlighted target.
• Activate a sleeping AIS target.
• Cancel tracking for the selected target.
• Sleep the selected AIS target.
• Long press: Cancel tracking for all TT targets.
• Delete marks/waypoints.
• Cancel character input.
Acknowledge active alerts.
Short press:
• Show the pop up menu for the highlighted item.
• Cancel changes to the currently selected setting.
• With pop up menus shown: Hide pop up menus.
Long press:
• Change the screen brilliance to [50].
Description
4