Advertisement
1.5V x 3
"AA" (LR6)
Shown Actual Size
Battery
Compartment
Bottom View
For best performance, we recommend
you replace the batteries that came
with this toy with three, new alkaline
batteries upon purchase.
• Locate the battery compartment on
the underside of the base.
• Loosen the screw in the battery
compartment cover using a Phillips
screwdriver and lift to remove the
cover. (The screw will remain in
the cover.)
• Remove the exhausted batteries.
Dispose of used batteries safely.
• Insert three, new AA (LR6) alkaline
batteries as indicated inside the
battery compartment.
Battery Replacement
Helpful Hint: For longer battery life, we
recommend use of alkaline batteries.
• Fit the tabs on the battery compart-
• Tighten the screw with a Phillips
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batter-
• Remove the batteries during long
• Never short circuit the battery
• Non-rechargeable batteries are not
• Only batteries of the same or equiv-
• If removable rechargeable batteries
• Rechargeable batteries are to be
• If you use a battery charger, it should
• If sound or lights from this toy
ment cover into the slots in the base
and close the cover.
screwdriver. Do not over-tighten.
ies: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
periods of non-use. Always remove
exhausted batteries from the toy.
Battery leakage and corrosion
can cause damage. Dispose of
batteries safely.
terminals.
to be recharged.
alent type as recommended in the
"Battery Replacement" instructions
are to be used.
are used, they are only to be
charged under adult supervision.
removed from the toy before they
are charged.
be examined regularly for damage
to the cord, plug, enclosure and
other parts. Do not use a damaged
battery charger until it has been
properly repaired.
become faint or stop working, it's
time to replace the batteries!
Advertisement
