Charge The Camera - eufy Security Video Baby Monitor 720P User Manual

Charge the Camera

1. Connect one end of the micro USB cable to the baby camera, and the
other end to the power adapter (5V 1A).
2. Plug the power adapter into a power outlet.
5V/1A
The new baby monitor and camera will set up automatically. You are all set
to use the products after the monitor and camera are fully charged.
06 English
ADDING A NEW BABY CAMERA
TO THE BABY MONITOR
The baby camera and baby monitor are paired and ready to use right out
of the box. Refer to the following steps when adding extra baby cameras or
after resetting a baby camera.
1. Enter menu settings, go to Camera -> Add Camera, then follow the
onscreen instructions to start the pairing.
c
23 o
4
Add Camera
Delete Camera
Cycle Cameras
Camera Settings
2. Press and hold the pairing button on the rear of the camera for 1
second until a notification prompt is heard.
3. Check the firmware version of the monitor (see image below) to
make sure your baby monitor and camera are running the same, latest
firmware version.
4
Night Vision Mode
Time Set
Sleep Mode
Anti-Screen Flicker
Language
Default Settings
Temperature Unit
Connect with Us
:
06 12 AM
60
Secs
Scanning for new camera
1Secs
Push the button on the
camera to pair.
:
06 12 AM
https://www.eufylife.com
United States +1 (800) 988 7973
United Kingdom +44 (0) 1604 936 200
Germany +49 (0) 69 9579 7960
Japan +81 03 4455 7823
support@eufylife.com
Monitor: v x.x.x
Camera: v x.x.x
SN: T8300E0A18370E72
English 07