Fcc Statement - eufy Security Video Baby Monitor 720P User Manual

The charger output voltage/current is 5Vdc/1A(for T8321-C) and 5Vdc/2A
(for T8321-M).The plug considered as disconnect device of adapter.
If you use a third-party charger, the recommended output voltage / current
of the adapter is 5Vdc / 1A (for T8321-C) and 5Vdc / 2A (for T8321-M),and
the adapter shall be CE approval type.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
RF exposure information: The Maximum Permissible Exposure (MPE) level
has been calculated based on a distance of d=20 cm between the device and
the human body. To maintain compliance with RF exposure requirement, use
product that maintain a 20cm distance between the device and human body.
Operating Frequency Range: 2410-2477MHz
The T8321-C Max Output Power: 18.04dBm(EIRP), The T8321-M Max
Output Power: 14.89dBm (EIRP)
CE SAR:
This T8321-M was tested for typical body-worn operations with the back
of the handset kept 0 mm from the body. The SAR limit of Europe is 4.0 W/
kg. Device types T8321-M has also been tested against this SAR limit. The
highest SAR value reported under this standard during product certification
for use at the limb is1.707W/kg . This device was tested for typical hand
held operations with the back of the device kept 0mm from the Limb.
The T8300-C device has been evaluated to meet general RF exposure
requirements and can be used in fixed exposure condition. RF exposure
information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the
human body. To maintain compliance with RF exposure requirement, use
product that maintain a 20cm distance between the device and human body.
The following importer is the responsible party (contact for EU matters
only)
Importer: Anker Technology (UK) Ltd
Importer Address:Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, United Kingdom B11 2AA
This product is designed and manufactured with high quality
16 English
materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as
household waste, and should be delivered to an appropriate
collection facility for recycling. Proper disposal and recycling helps
protect natural resources, human health and the environment.
For more information on disposal and recycling of this product,
contact your local municipality, disposal service, or the shop
where you bought this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio / TV technician for help.
FCC Radio Frequency Exposure Statement
The T8321-C device has been evaluated to meet general RF exposure
requirements. The T8321-C can be used in fixed exposure condition. The min
English 17