Brinkmann MARCONI Manual

Manual for
Design :
Brinkmann Audio
Im Himmelreich 13
88147 Achberg DE
Germany
Tel.: 08380 / 981195
Fax: 08380 / 981233
www.brinkmann-audio.com
info@brinkmann-audio.com
Legal Regulation of the European Community :
This amplifier had been designed and testet according to the guidelines IEC55013 and
IEC55020, it meets the safety requirements IEC60065.
Informations for Safety :
The preamplifier MARCONI is only to be used in dry rooms with an average temperature
and is only allowed for 220-240V, 50Hz alternating current.
The power supply is only to be connected to grounded wall sockets.
Please connect or disconnect only when the amplifier is not connected to the mains.
The amplifier is not switched off in the stand-by modus.
Always disconnect the amplifier from the mains when it is not used for a longer period of
time ( during holidays etc. ) !
Never lift or remove the glass plate while the amplifier is connected to the mains !
Attention, dangerous voltage !
Repairs, modifications etc. are only to be carried out by the company
by specially authorized workshops ! Please allow some time before lifting the glass plate, so
high voltages can reduce.
Always keep the amplifier away from wet, heat and open fire. Never expose it to the blazing
sun ! Never place receptacles with fluids on the amplifier.
The amplifier is equipped with a temperature limiter that switches off at about 65°C ; to
guarantee a flawless function please make sure to have a free space for air circulation
measuring 30cm above the preamplifier and 10cm on each side. The heatsinks are never to
be covered !
brinkmann
Preamplifier MARCONI
Service :
Ing.-Büro R. Klatt-Milsmann
Deppendorfer Str. 151
33793 Bielefeld DE
Germany
Tel.: 05203 / 883033
Fax: 05203 / 883034
R.Klatt-Milsmann@gmx.de
brinkmann
itself or