Advertisement
6) Combine the Chair
Back and Chair Seat by
using 4 pieces Short
Screws + Small Washer
+ Lock Nut.
9) Add the Side Support #3 to the Chair
Backs and the Chair Frame Crossbar with
Long Screw + Small Washer + Lock Nut.
MCDSG Double Seat Glider Chair Assembly Instructions
7) Combine the two Chairs by adding a Short Screw + Small Washer + Lock Nut
in the middle of the Chair Seat. Insert the Small Support #10 between the two
Chair Backs using Short Screw + Small Washer + Lock Nut.
10) Attach the Small Support #10 between the two Chair Backs
to the Chair Frame Crossbar using Short Screw + Small Washer
+ Lock Nut.
Before use, make sure all nuts are securely tightened.
(Factory may have included extra washers and nuts)
8) Attach the combined Chairs to the Chair Frame
Arm, at the side of the Chair Back and the Chair
Seat using Long Screw + Small Washer + Lock Nut.
201907
4
Advertisement
