Advertisement
Unpack product from package and review contents. Keep all packaging until product has been
reviewed. This product should be inspected prior to use to make certain all parts are intact and safe to
use after assembly.
Never allow children to use this product without responsible adult supervision.
Some chemicals can damage the finish on the product. Do not use harsh chemicals such as alcohol,
ammonia, gasoline, carbon tetrachloride, paint thinner, etc. to clean this product. Use soap and water.
Locate all parts before assembly. Two adults may be required for assembly. During assembly, position on
soft carpet or non-abrasive surface to avoid damage to the chair. Do not tighten screws until assembly is
complete.
After assembly: Regularly check all bolts and tighten any that are loose.
Tools Required: 4mm Hex Wrench, Phillips Screw Driver, 10mm Combination Wrench
COMPONENTS
A) Acorn Nut - 29 Pieces
E) Large Washer - 16 pieces F) Lock Nuts - 29 pieces
1) Main Frame - 2 pieces
6) Swing Arms - 4 pieces
10) Small Support - 1 piece
MCDSG Double Seat Glider Chair Assembly Instructions
B) Short Screw - 10 pieces
2) Short Frame Crossbar - 1 piece
4) Chair Frame Crossbar - 1 piece
7) Chair Frame Arm - 2 pieces
11) Hex Wrench - 1 piece
C) Plastic Spacer - 4 pieces
G) Small Washer - 62 pieces H) Small End Cap - 2 pieces
5) Long Frame Crossbar - 1 piece
8) Chair Back -
2 pieces
12) Wrench - 1 piece
D) Long Screw - 19 pieces
3) Side Support - 2 pieces
9) Chair Seat -
2 pieces
13) Large End Cap - 2 pieces
2
Advertisement
