Installing The Storage Expander - Intel RES3TV360 Hardware User's Manual

4.3 Installing the Storage Expander

This section describes how to install the Storage Expander into your computer cabinet or server.
Follow the steps below to install your Storage Expander card and connect your internal or external storage devices.
Caution: Be sure to handle the expander by its edges only and touch a grounded metal object before handling the
expander card.
1. Turn off the power to the system, all drives, enclosures, and system components. Remove the power cord(s).
2. Remove the server cover. For instructions, see your server system documentation.
3. Remove the release paper on the card bumpers and adhere them to the designated locations on the bottom
of the card.
4. Insert the expander card into the area between the fans and backplane. When installed properly, the expander
card bumpers should rest securely on the chassis floor.
Intel® Storage Expander RES3TV360 Hardware User's Guide
Figure 3. Installing the Expander Card
9