Registering And Deleting A User - Subaru Legacy 2021 Owner's Manual

414
Driver Monitoring System
that has been thoroughly wrung out.
. When the synchronized user func-
tion is turned OFF, manual repeat facial
scan is not possible.
& Registering and Deleting a
User
Users can be registered in the Driver
Monitoring System, and registered users
can be deleted. For the user registration
and delete procedures, refer to "Driver
Monitoring System" FP227.
NOTE
. When the Driver Monitoring System
OFF indicator, Driver Monitoring Sys-
tem temporary stop indicator, or Driver
Monitoring System warning is illumi-
nated, the following items cannot be
selected.
– Register User
– Delete User
– Delete All Users
. User information can also be deleted
by resetting the center information dis-
play to the factory default settings.
When the settings are reset to the
factory default settings, all user infor-
mation is deleted. The settings cannot
be reset to the factory default settings
when the Driver Monitoring System is
OFF.
& Registering and Deleting Dri-
ver Position Personalization
At the time when a user is registered, the
seat position, outside mirror angle, and
reverse tilt-down outside mirror angle are
registered at the same time. To change the
setting for the seat position, outside mirror
angle, or reverse tilt-down outside mirror
angle, refer to "Driver Monitoring System"
FP227.
NOTE
. Start the user registration after ad-
justing the seat position, outside mirror
angles, and reverse tilt-down outside
mirror angle. If they are adjusted during
user registration, it may be disrupted.
Refer to "Power Seat" FP32 or "Out-
side Mirrors" FP271.
. If the ignition switch is turned to the
"OFF" position before user registration
is complete, the information of the
adjusted seat position, outside mirror
angle, and reverse tilt-down outside
mirror angle will not be saved.
. When the user recognition setting is
OFF, or when the Driver Monitoring
System OFF indicator, Driver Monitor-
ing System temporary stop indicator, or
Driver Monitoring System warning is
illuminated, the following items cannot
be selected.
– Update Seat and Mirror Position
– Delete Driver Position
. The driver position can be registered
or deleted only when a registered user
is sitting in the driver's seat and user
recognition is completed.
& Driver Monitoring System
ON/OFF Settings
NOTE
. When the vehicle is stopped and the
driver's door is opened and closed, the
Driver Monitoring System automati-
cally turns ON regardless of the push-
button ignition switch status.
. After the Driver Monitoring System
was turned OFF, if the Driver Monitoring
System is turned ON while the driver's
door is open, user recognition may not
occur correctly.
. When the Driver Monitoring System
is turned OFF after user recognition
was completed, the user recognition
function stores the Driver Monitoring
System ON/OFF state.
! To turn on/off the Driver Monitoring
System
To turn the Driver Monitoring System on
and off, operate the center information
display. Refer to "Car settings" FP220.