Table of Contents
Advertisement
. Once the welcome screen appears, it
takes a certain period of time to display
it again.
. If the ignition switch is operated
after unlocking the driver's door, the
welcome screen will not appear even
when the driver's door is opened and
closed.
. The welcome screen will disappear
when you lock the driver's door by
using the remote keyless entry system
(all models) or the keyless access
function (if equipped) while the wel-
come screen is displayed.
. The welcome screen including the
audio/navigation unit can be set to on
or off.
. The welcome screen can be set to on
or off. For details, refer to "General
settings" FP216 (11.6-inch display
models) or "General settings" FP234
(dual 7.0-inch display models).
. The good-bye screen can be set to
on or off. For details, refer to "General
settings" FP216 (11.6-inch display
models) or "General settings" FP234
(dual 7.0-inch display models).
& Warning Screen
Example of warning
If there is a warning message or a
maintenance notification, it will appear on
combination meter display (color LCD).
Take the appropriate actions based on the
messages indicated.
& Meter Information Screen
The meter information screen can be
changed. For details, refer to "General
settings" FP216 (11.6-inch display mod-
els) or "General settings" FP234 (dual
7.0-inch display models).
Combination Meter Display (Color LCD)
! ECO gauge
The ECO gauge shows the difference
between the average rate of fuel con-
sumption since the trip meter was last
reset and the current rate of fuel consump-
tion.
The ECO gauge indicates the current fuel
efficiency as shown in the following chart.
Needle position
Displayed unit
"+" side
MPG
Better
l/100km
Poorer
203
3
"−" side
Poorer
Better
– CONTINUED –
Advertisement
Chapters
Table of Contents
