Cleaning The Pre-Motor Filter - Dirt Devil REBEL 3.0 User Manual

IMPORTANT: It is very important that filters are kept clean to obtain maximum performance from your
vacuum cleaner. Not cleaning and not replacing your filters regularly can reduce the suction power and
cause overheating and permanent damage to the vacuum cleaner.

Cleaning the pre-motor filter

Hold the dirt container and twist
the lid anti-clockwise.
Tap excess dirt from the filter. Rinse under a tap and leave to dry for 24 hours.
IMPORTANT: Water temperature should not exceed 40°C when washing pre-motor filter.
IMPORTANT: Ensure filters are completely dry before inserting back into the vacuum cleaner.
7
MAINTENANCE
Lift the lid to reveal the
pre-motor filter.
Lift out the pre-motor filter.
40˚C
MAX
Dirt Devil Service Line: AU: 1300 829 287
24hr 24hr
NZ: 0800 829 695