Restore Factory - Bard W3RV2-R Literature Assembly

Initiating a Restart (continued)
7. Enter button to select Restart
8. Up/Down button(s) and choose from the following options:
- Warm Start (least intrusive, quickest response)
- Cold Start (comprehensive restart)
- No (no Restart made)
9. Enter button to initiate
Note: controller will restart to Home Screen
Restore Factory: If the controller becomes unmanageable due to improper settings, the device can be
reset to "factory" settings by initiating a Restore Factory command.
To initiate a Factory Reset from the Home Screen, press:
1. Right button to access the Main Menu Screen
2. Down button through entries to highlight Advanced
3. Enter button to select/enter Advanced Screen
4. Down button through entries to highlight Restart/Restore
5. Select button to select/enter Restart/Restore Screen
6. Controller will ask for Admin Level Password
Factory Default Admin Level Password: BARD
7. Select button to select/enter Restart/Restore
8. Down button through entries to highlight Restore
9. Enter button to select Restore Factory
10. Up/Down button(s) to Toggle "No" to "Yes"
11. Enter button to initiate
Note: controller will restart to Home Screen
WARNING! All other levels of programming within this control are specific to performance parameters
of this unit, and changes or alterations may result in damage to the unit and/or component failure. Before
making any changes to specific programming details not present in this manual, please consult with the
Technical Service Department of Bard Manufacturing Company, Inc.
Manual 2100-560
Page 8 of 8