Download Print this page

Asus VX278 Troubleshooting Manual page 5

No display after turning monitor on
Hide thumbs Also See for VX278:

Advertisement

Check if the signal cable (VGA / DVI / HDMI / DisplayPort) is well connected and
confirmed another end of the output cable has been firmly connected to computer input
port (graphics card). Unplug and plug 2-terminals again to ensure all the pins aren't bent.
VGA
Please check whether power cord is connected or not , or you can use the same power
cord attached in another product.
If the model had attached with the power supply (AC-adapter), make sure the power
supply has connected to the screen. Please check if the light of power supply is ON. If the
light is NOT ON, change another power supply to test.
Plug other electrical equipment into the power outlet to check if the outlet normally work.
Connect to the other computer (PC / Notebook) to check if it can work.
Are there any regional differences in
supported (for example: If monitor was bought in Taiwan, can it be used in China
or other countries?)
ASUS LCD monitor can support power specification: AC 100-240V. As long as within this
voltage range, the display can work properly. However, please be noted that if you bought
a monitor from another country, the power cord is not necessarily compatible to power
outlet. Customer should replace the appropriate power cord or plug adapter in order to
ensure normal power supply of the display.
If above steps didn't solve the problem, please contact ASUS Customer Center for help.
DVI
power specifications that
HDMI
ASUS LCD monitor
Displa

Advertisement

loading

This manual is also suitable for:

Zenscreen go mb16ap