Standard Displays - ABB Totalflow X Series Startup Manual

Standard Displays

Items that appear on the unit's display are programmable by the user,
however based on the measurement application; units will be shipped
with some default display items. The following table is a typical set of
default displays for an AGA-3 application. Engineering units may vary
from those shown if the unit supports the "Selectable Units" feature.
Description
Current Date and Time
24 hour clock
Yesterday's Percent DP Low Limit
Percent time below DP Low Set Point
Yesterday's Percent DP High Limit
Percent time above DP High Set Point
Current Flow Rate
Programmable SCF, MCF or MMCF
Total Accumulated Volume
Programmable SCF, MCF or MMCF
Battery Voltage
Displayed in Volts
Station ID
ID of the box.
Differential Pressure
Inches H2O
Static Pressure Absolute
PSIA
Flowing Temperature
°F
Yesterday's Volume
Programmable SCF, MCF or MMCF
Previous Calculation Period Volume
Device ID
Individual application ID
Charger Voltage
The duration that each parameter is displayed can vary from 1 to 255
seconds (default is 4 seconds); a setting of 0 seconds will turn that
display item off.
Standard Display
DATE/TIME
MM/DD/YY HH:MM:SS
Yest DP Low
NN PERCENT
Yest DP High
NN PERCENT
Flow Rate
NNNNNN.N SCF/HR
Total Accum. Volume
NNNNNN.NN MCF
Battery Voltage
NN.N VOLTS
Station ID
Diff. Pressure
NNN.N IN. H2O
Static Pressure
NNN.N PSIA
Temperature
NN.N DEG. F
Yesterday's Volume
NNNN.N MCF
Last Calc. Volume
NNNN.N SCF
Device ID
Charger
NN.N VOLTS
15