Table of Contents
Advertisement
Modular Floor diFFusers
INSTALLATION & MOUNTING INSTRUCTIONS
installation instructions
The components for the modular floor diffuser assembly
are shipped assembled. The following is a recommended
installation guide.
STEP 1: Cut the hole in the floor/tile according to the following
table:
Hole Sizes
Size
Ring Press Fit / Zip Clip
8 in.
Ø8.50
Ø10.50
10 in.*
*10 in. available in aluminum only
STEP 2: Secure the mounting ring into the floor cutout:
A. RPF rings do not require additional hardware; the
rubberized seal prevents the unit from accidentally
being dislodged during normal foot traffic as shown in
Figure 1. Do not use glue!
B. Zip Clip mounting uses three (3) clips that lock the
ring in place. The clips can be inserted onto the legs
of the mounting ring from the roomside opening and
locked into place, as shown in Figure 2.
For aluminum mounting rings the zip clip adapter must
NoTe:
first be snapped into place before placing the zip clips, as
shown in Figure 3.
6
MODuLAr FLOOr DIFFuSerS - Manual | priceindustries.com
MFD
+.125
(216 ± 3/-0)
+0.00
+.125
(267 ± 3/-0)
+0.00
PHILLIPS HEAD
FiGure 1: rPF riNGs
FiGure 2: ZiP CliP MouNTiNG
E F
BASKET
FiGure 3: ZiP CliP adaPTer For
aluMiNuM MouNTiNG riNGs
Floor Tile
Zip
Clip
Advertisement
Table of Contents
