Table of Contents
Advertisement
Modular Floor diFFusers
PRODUCT OVERVIEW
diffuser Face options
A. Plastic diffusers and can be
mounted in either RPF or ZC
configurations.
B. Aluminum diffusers and can be
mounted in either RPF or ZC
configurations. ZC available
with ZC adapter.
Mounting ring options
A. Ring Press Fit (RPF) mounting
ring uses a soft rubberized seal
to hold the mounting ring in the
bore. RPF comes standard with
all modular floor mounting rings.
NoTe:
The maximum suggested
carpet thickness used for Ring
Press Fit is 5/16 in., carpets
beyond that thickness should
use Zip-Clip mounting.
B. Zip Clip (ZC) mounting ring uses
the RPF seal to center the ring in
the bore and three (3) clips which
ratchet in place to secure the
mounting ring to the floor. If the
floor tile has a contoured bottom,
care must be taken to ensure all
three zip clips can tighten against
the tile.
C. Stepped Bore does not
require a mounting ring; the
floor is cut to size to fit only the
diffuser face.
4
MODuLAr FLOOr DIFFuSerS - Manual | priceindustries.com
Modular Floor diFFusers
TWIST PATTERN
MouNTiNG riNG
POLYMER
aluMiNuM adaPTers
DISPLACEMENT PATTERN
ALUMINUM
sTePPed Bore
ZiP CliP
Advertisement
Table of Contents
