Connecting The Liquid Cooling System; C Onnecting The C Oolant H Oses; D Isconnecting The C Oolant H Oses - Andor Technology iStar Hardware Manual

iStar sCMOS
3.4 C
onneCting tHe
An overview for connecting an liquid cooling system is outlined below- please refer to the information supplied with your
cooling system for information specific to its operation.
3.4.1C
onneCting tHe
1. Press the hose insert into the coolant hose, and repeat for the second hose.
2. Press the hose connectors into the connections on the camera head, ensure they click into place.
3. Confirm the hoses are connected securely by applying pressure on the front of the camera body and pulling
backwards on each hose.
4. Connect the other ends of the coolant hoses to the cooling system- refer to the cooling system manual.
3.4.2 d
isConneCting tHe
1. Press the latch on the camera hose connection away from the hose.
2. Hold the latch in and pull the hose backwards.
3. The hose should release from the camera connection with little resistance.
NOTE: If the hose does not release, ensure that the latch on the camera connection is pressed in fully as shown
above.
Version 1.2 rev 11 Jun 2019
l C
iquid ooling
C H
oolant oses
C H
oolant oses
s
ystem
23