Cables to Go TruLink 35555 User Manual page 13

2. Auto-Scan Interval timer
[n] *(Available only when Auto-Scan function is ON)
You can change the Auto-Scan interval by pressing the appropriate number key or the
number pad keys.
n
[1]
[2]
[3]
[4]
3. Auto-Scan OFF : When the KVM Switch is in Auto-Scan mode, you can
use these methods to stop the Auto-Scan :
Press SPACE key
operation by pressing Space key and stay on the current scanning port.
Press the any other key on the key board
to stop the Auto-Scan operation and jump back to original active pc
TruLink™ 4-Port USB 2.0 and PS2 KVM Switch
Scan Interval
5 sec.
10 sec.
15 sec.
20sec.
: The KVM Switch with hub will stop the Auto-Scan
This will cause the KVM Switch
:
13