Advertisement
TO INSERT BATTERIES
BATTERY
COMPARTMENT
ASSEMBLY
Squeeze release levers to attach or remove
1
the BLAST SHIELD.
LOADING AMMO
Load CLIP SYSTEM DARTS into DRUM MAGAZINE.
•
Be sure DARTS are inserted in direction indicated on
DRUM MAGAZINE.
•
Insert 1 CLIP SYSTEM DART at a time.
•
DRUM MAGAZINE can hold up to 50 CLIP SYSTEM DARTS.
Do not insert more than 50 darts.
NOTE: Use only CLIP SYSTEM DARTS with this blaster.
Loosen screws in battery compartment
1
door with a Phillips/cross head
screwdriver (not included).
Remove battery tray. Insert 6 x 1.5V "D"
2
or LR20 alkaline batteries.
Replace battery tray and tighten screws.
3
INSERTING DRUM MAGAZINE
DRUM
MAGAZINE
Insert DRUM MAGAZINE into DRUM
1
CONNECTOR until it locks into place. Make sure
the word "FRONT" on DRUM MAGAZINE faces
front of blaster.
FIRING
Rotate switch to "ON" position.
1
NOTE
JAM CLEARING DOOR
READY
INDICATOR
CLIP RELEASE
Slide the CLIP RELEASE BUTTON toward
2
the back of the blaster to remove DRUM
MAGAZINE.
Pull trigger to fire.
2
JAM CLEARING DOOR must be fully closed
for blaster to fire. READY INDICATOR must be
green for blaster to fire.
Advertisement
