Troubleshooting Guide - Zanussi ZBHC8 User Manual And Installation Instruction

Thermo ventilation
Table of Contents

Advertisement

Maintenance and Safety Items
Maintenance:
Please make sure that the machine
is power off before maintenance.
Please clean the front cover
a] please use the soft rag or
soft brush to clean the dirty
place of the cover.
b] Put a clean rag in the warm
water dissolved with neutral
detergent, then use the rag
to wipe the front cover. Use another rag to wipe the panel then. The surface shall have no
detergent residues.
Filter cleaning:
a] Please take out the filter and put it in water to clean the dust and dirty after around 1~3 weeks
usually, then put it back to the cover after the filter is dry.
b] Subject to the frequency of use and environment.
Safety Items:
Do not put your hands into the machine when running, to avoid injury or burn by the heater.
Do not spray water into the main body, which may damage the motor, or cause electric shock
by the electricity leakage.
In order to avoid any accident or injury, if any of the following symptoms and abnormal situation
occur, please switch off the electricity and ask qualified electrical engineering contractor for
repairing or checking( self repair by user is strictly prohibited, to avoid danger).
a] Turn on the power, the fan does not work
b] The power suddenly on, then gets off suddenly, and in turn.
c] Abnormal sound and vibration during operation
d] Plastic smell or other abnormal smell occurs.
Trouble-shooting guide:
Phenomenon
Not operate when the power
turning on
The sound turns much louder
The remote control does not work
Check
No power supply
The light of the remote control
does not light on
Filter blocking
Low battery
-12-
Solution
Switch the power
Ask the qualified engineer
for repair
Take out the panel and
clean the filter
Change the battery

Advertisement

Table of Contents
loading

Table of Contents