Emergency Button - Zanussi ZBHC8 User Manual And Installation Instruction

8. Auto-swing
Start: default running the on and off operation, same with fan. If it is ON, LCD "
display, and " " icon will disappear when it is off. When it is off, the swing function is invalid,
and the louver will resume to 0 degree position.
Start2 : When it is fan mode, the default is 90 degree louver position (The actual max angle of the
glass panel is about 85 degrees).
Auto-swing When the fan is running, press the "OSC
degree position to swing from 45 degree to 90 degree. Press "OSC
function will stop, and if you press it again, it will run auto-swing again.
First start 90 degree
Autimatically memorize
previous setting
Stop: When press "ON/OFF
position. But then it will resume in next usage, as recorded in memory.
9. Ionizer Function
Boot: ON state, the host machine body receiver display window marked bright.
OFF state, the host machine body receiver display window marked out close.
In the OFF state of the circulating fan, the negative ion key is invalid.
Stop: in the process of running, press the negative ion
the host receiver display window Marked out close;
once again pressed the button, negative ions
display window marked bright. So repeatedly.

10. Emergency Button:

Press the start emergency button to automatic mode operation, once again touch the emergency
button to switch to the ventilation mode operation, and touch again the emergency button to switch
to standby mode.
Emergency Button
:
45~90 degree
oscillation
Restart 0 degree
" button or pre-set time runs over, the louver will return to 0 degree
:
-11-
" button, the louver will turn from 90
" button again, auto-swing
Stop at any angle
Stop and shut off
button, negative ions do OFF action, while
do ON action, while the host machine body receiver
" icon will
45~90 degree
oscillation
Stop at any angle