RocketFish RF-G1603 Quick Setup Manual

PACKAGE CONTENTS YOU WILL NEED
• HDMI splitter High-speed HDMI cables, such as Rocketfish,
• AC power adapter available in multiple lengths.
Note: Using this product with 4K @60Hz video will
• Quick Setup Guide
require the use of 18 Gbps bandwidth cables for best
performance.
FEATURES
• Supports 3D video
• 480i to 4K@60 Hz (4K UHD) from the source device
• Supports 18 Gbps bandwidth
• Compatible with most TVs, projectors, and video displays with HDMI inputs
• Gold-plated connectors for maximum signal transfer and corrosion resistance
• Supports HDMI CEC commands for remote control functionality
• Wall-mountable with integrated key-hole slots (hardware not included).
HDMI SPLITTER BASICS
This Rocketfish two-way HDMI splitter will send HDMI audio and video signals from a
single source, such as a Blu-ray/DVD player or cable/satellite box, to two destinations,
such as a TV and an AV receiver. It is ideal for sending the audio signal from a 4K source to
an AV receiver (one that does not support 4K video pass-through), and video signal to a
4K UHD TV.
Back
Front
HDMI
OUT 1
OUTPUT1
Power LED
Before using your new product, please read these instructions to prevent any damage.
SETTING UP YOUR HDMI SPLITTER
1 Connect a high-speed HDMI cable (not included) from your video source to the INPUT
port on the HDMI splitter.
2 Connect another high-speed HDMI cable from your HDMI splitter's OUTPUT1 or
OUTPUT2 port to the IN port of an audio or display device.
HDMI
OUTPUT1 INPUT
HDMI
3 Connect the included AC power adapter from the micro USB port on the HDMI splitter
to a standard 120V AC power outlet. The Power LED indicator on the front lights white.
HDMI Micro USB
HDMI IN
OUT 2 5V/1A
Micro USB
INPUT OUTPUT2
OUTPUT1 INPUT OUTPUT2
4 Turn on all connected devices and operate. When you are finished, you can leave your
HDMI splitter plugged in.
Video sources
Cable/Satellite box
OR
Game
console
Blu-ray player
OR OR
OUTPUT2
Audio devices
HDMI
OR
Soundbar
AV receiver
OR
Display devices
HD TV
Monitor
OR OR
AC power
adapter
RF-G1603 / RF-G1603-C
SPECIFICATIONS
HDMI version 2.0b
Video signal bandwidth 18 Gbps
Resolutions supported 480i to 4K@60 Hz (4K UHD) from the source device
HDMI HDCP Compliant with HDCP 2.2
Power 5 VDC / 1,000 mA (5 W max) Micro USB
Dimensions 3.9 × 3.4 × 1.1 in. (100 × 87 × 27 mm)
OR
Streaming
sticks/boxes
TROUBLESHOOTING
Problem Possible solution
Power LED is not on Make sure that the HDMI splitter's power adapter is plugged in.
Video has • Make sure that you are using high-speed HDMI cables for all
interference connections.
• Make sure that the TV's video resolution supports the video
source's output resolution.
No video and/or • Make sure that the audio and video formats of the content
audio being used (such as Blu-ray disc) are supported by all
connected devices.
• Make sure that your destination components (such as TV and
Projector AV receiver) are set to the correct HDMI inputs.
• Make sure that you are using High-Speed HDMI cables for all
connections. To fully support 4K resolution, you should use
HDMI PREMIUM Certified Cable.
• Very long length of cables (over 20 ft./6.1 m) may cause a loss of
Power
video signal or downgrade to lower resolution. Use a shorter
outlet
cable, if possible.
• Unplug the HDMI splitter's AC power adapter, then plug it back
in again.
QUICK SETUP GUIDE
, 4K HDMI Splitter