Control Panel; Control Panel On The Spay Gun; Spray Nozzles And Nozzle Filter - i-team i-cover 2.5 User Manual

2.1 Control panel

1. Battery power status display. The green
battery power status LEDs are on during
normal use. When the battery is full all green
LEDs are on, when the battery gets empty
the green LEDs will go off one by one.
2. Hour meter. The counter on the right
(Figure 5, pos B) counts in 6 minute cycles.
This means that if the display shows a "1",
the i-cover® 2.5 has run for 6 minutes. After
10 cycles, the second counter from the right
(Figure 5, pos A) will show a "1", this
indicates 1 hour. The counter on the right
(Figure 5, pos B) starts again at "1".
3. The ON/OFF switch.

2.2 Control panel on the spay gun

1. The ON/OFF switch on the spray gun.

2.3 Spray nozzles and nozzle filter

Spray nozzle diameter and color
0.2 mm x 1 yellow ring
0.3 mm x 1 green ring
0.5 mm x 1 orange ring
0.8 mm x 1 blue ring
If the nozzle becomes clogged due to a particular disinfectant, the nozzle filter can help to prevent
clogging by attaching it in front of the spray nozzle.
Figure 5
Figure 6
Intended spaces
Fragile or sensitive objects
Indoor applications
Food preparation areas
Outdoors and walls
14