Enhancing Your System - Sharp XL-1500H Operation Manual

Enhancing your system

The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
To the line
output sockets
White
Red White
RCA lead
Headphones
Listening to the playback sounds from
VCR, DVD, etc.
1 Use a connection lead to connect the VCR, DVD, etc. to the VID-
EO/AUX IN sockets.
VCR, DVD, etc.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX
button.
4 Play the VCR, DVD, etc.
Note:
Red
To prevent hum interference, place this unit away from a television.
To record CD signals on MDs
The digital signal from this unit can be recorded by MiniDisc record-
ers, etc.
1 Remove the DIGITAL OUT socket cover.
2 Use a connection cable for digital recording to connect the unit to
the OPTICAL IN socket of a MiniDisc recorder, etc.
3 Press the ON/STAND-BY button to turn the power on.
MD recorder
4 Put the MiniDisc recorder, etc. in the recording mode.
5 Play a CD on this unit.
Notes:
When using the optical digital socket, remove the cap first. After
using the socket, replace the cap.
To the optical line Only CD signals can be output.
input socket
Headphones
Connection cable
Before plugging in or unplugging the headphones, reduce the vol-
for digital recording
ume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME buttons.
01/11/30 1500_UK3.fm
XL-1500H
31