Advertisement
PRODUCT INFORMATION
GENERAL INFORMATION:
SYMBOLS:
SYSTEM:
Preparation
This manual is part of the product and describes the safe and
n
proper installation of the system. Read the instruction carefully before installation
Please note that the assembly should only be done by qualified and trained staff in
n
strict compliance with all details indicated in this document.
Improper installation in variation from manufacturer's specification may cause defects
and danger, thus endangering the safe fixing of the product as well as the safety of
the prospective user.The liability of the manufacturer shall be excluded in case of
defects and consequential damages resulting from incorrect assembly of this product.
Please check the completeness of the delivered parts and check carefully if any
n
transport damages are visible
If any parts are damaged or lost, please immediately contact the responsible supplier.
n
It is assumed that you have exactly identified all cutting dimensions according to
n
the measurement instruction for raumplus-products
Symbol
Importance
Risk or danger
Advice and information
Additional information /
other documents
Directional data /
direction of movement
„yes" and „right"
„no" and „wrong"
Follow the order
System Information: Cornice
2 element depths
n
min./max. element height
n
min./max. element width
n
438 mm / 566 mm
=
500 mm / 3000 mm
=
=
100 mm / 2000 mm
3
Advertisement
