Muscle Rack GRW60 - 4 Quick Start Quide

Medium Duty Steel Shelving
GRW60 - 4 4 Shelf
GRW60 GRW60 - - 4 4 Shelf 4 4 Shelf
Description Qty.
A - Beams 8
B - Braces 8
C - Post 8
D - Woodboard 4
E - Coupler 8

Safety Instructions

Safety Instructions Safety Instructions
These units should be placed on a level surface. Failure to do so can result in poor product performance or create a
possible safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not
included. Do not use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY
PART OF THE UNIT, OR USE IT AS A LADDER. DO NOT OVERLOAD. Evenly distribute the weight on each level
and always keep the heavier loads on the bottom. Use care when working with metal parts.

General Instructions

General Instructions
General Instructions
Assembly is done with the tabs of the beams and braces fitting into the slots of the post. A rubber mallet may be used
on the beams and braces to seat the tabs properly. A hammer can also be used, providing one uses a cloth or a block
of wood between the hammer head and the parts to prevent damage. Tap gently and be sure the tabs are straight and
fully engaged.
Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel
free to contact our Muscle Rack manufacturing facility at, (773) 475-3000 and request customer service.
We can also be reached on the internet at the following email address : customerservice@edsal.com.
To obtain replacement parts, please provide the following information :
- Model # - Part # & Description
Boltless
Steel Shelving
A - Beams
E - Post Coupler
- 60"h x 18"d x 36"w
- - 60"h x 18"d x 36"w 60"h x 18"d x 36"w
Part Number Part Size
HMBE 3403 34 7/8"
HMBE 1603 16 27/32"
HMPT 3003 30"
RPBSR100 18" x 36"
HIPC 0200 2 1/2" x 7/8"
- Location Purchased
B - Braces
D - Woodboard Shelf

Tools Necessary For Assembly

Tools Necessary For Assembly Tools Necessary For Assembly
Rubber Mallet
Note:
TAP GENTLY ! A Hammer could be used
with a cloth or a wood block to protect the parts.
- Date Purchased
MODEL NUMBER
GRW60 - 4
C - Post
Consumer Products Division
Edsal Manufacturing Company
4400 South Packers Avenue
Chicago, IL 60609 www.edsal.com