Clarke Air CSG2K Operating & Maintenance Instructions
Clarke Air CSG2K Operating & Maintenance Instructions

Clarke Air CSG2K Operating & Maintenance Instructions

Air staple gun

Advertisement

Quick Links

AIR STAPLE GUN
MODELS: CSG2K & CSG3K
Part Nos. 3110260 & 3110258
OPERATING & MAINTENANCE
OPERATING & MAINTENANCE
INSTRUCTIONS
INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Air CSG2K and is the answer not in the manual?

Questions and answers

Summary of Contents for Clarke Air CSG2K

  • Page 1 AIR STAPLE GUN MODELS: CSG2K & CSG3K Part Nos. 3110260 & 3110258 OPERATING & MAINTENANCE OPERATING & MAINTENANCE INSTRUCTIONS INSTRUCTIONS...
  • Page 2: Declaration Of Conformity

    Part No ............3110260 ......3110258 Please note that the details and specifications contained herein, are correct at the time of going to print. However CLARKE International reserve the right to change specifications at any time without prior notice. Always consult the machine’s data plate...
  • Page 3 GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.
  • Page 4: Safety Precautions

    SAFETY PRECAUTIONS IMPORTANT Failure to follow these precautions could result in personal injury, and/or damage to property. When operating this tool, ALWAYS wear: a. approved impact resistant SAFETY GOGGLES. (Eye glasses are NOT safety glasses) b. EAR DEFENDERS a good pair of INDUSTRIAL GLOVES ALWAYS disconnect the tool from the air supply when not in use, and before carrying out any maintenance ALWAYS keep a safe distance between yourself and others when using the...
  • Page 5: Air Supply

    ASSEMBLY and OPERATION Ensure the Stapler is not loaded, then, with the air supply turned OFF, connect the air line to the 1/4” BSP connector. (A Whip Hose with Quick Fit coupling is available from your Clarke dealer) Both models are provided with a trigger safety catch, CSG2K shown arrowed in figs 1A and 1B.
  • Page 6 LOADING THE STAPLE GUN WARNING! Ensure that the power supply is off before attempting to load the gun. This will ensure that the gun will not fire unintentionally. The staple gun may be loaded with staples as follows: Using the Hex. Wrench supplied, remove the Hex.
  • Page 7: Maintenance

    Drain water from compressor air tank, and air line. Check and clean, if necessary, the air inlet gauze filter. A bottle of CLARKE Air Line Oil** is supplied with the kit. Unscrew the cap and withdraw the nozzle, which is reversed within the neck of the bottle.
  • Page 8 PARTS LIST - CSG2K & CSG3K No. Description Part No. No. Description Part No. 1 Screw 5 x22 32 Step Pin 5x17.5 2 Exhaust Cover 33 O-Ring 17.3x3 3 Compression Spring 34 Tail Cover 4 Seal Air 35 Air Plug 5 Cylinder Cap Assy 36 Compression Spring 6 O-Ring 11.8x2.4...
  • Page 9: Parts Diagram

    PARTS DIAGRAM...
  • Page 10 ACCESSORIES A wide range of Airline accessories is available, including Filter/Regulators. Lubricators, High Pressure Hoses from 5 to 100 Metres, Whip hose etc. Contact your CLARKE dealer for further information, or CLARKE International Sales Department on 01992 565333 CSG2K CSG3K...
  • Page 11 HAND-ARM VIBRATION Employers are advised to refer to the HSE publication “Guide for Employers”. All hand held power tools vibrate to some extent, and this vibration is transmitted to the operator via the handle, or hand used to steady the tool. Vibration from about 2 to 1500 herz is potentially damaging and is most hazardous in the range from about 5 to 20 herz.

This manual is also suitable for:

Air csg3k31102603110258

Table of Contents