Listening To A Cassette Tape - Sharp CD-CH1500W Operation Manual

Listening to a Cassette Tape

E-23 ENGLISH
PUSH EJECT
Sound Control (See page 15.)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button.
3
Open the cassette door by pushing the area marked "PUSH EJECT
".
4
Load a cassette into the compartment with side A facing you.
5
Press the REVERSE MODE button to choose one side or both
sides.
... To listen to both sides.
... For repeat play of both sides.
... To listen to one side.
6
Press the button to listen to side A, or the
" To play both sides ( ), start from side A. When playback starts from side B, side A
will not be played.
" To play side B using the remote control, press the
side. Then, press the / button.
To stop playback:
Press the button.
Fast forward/rewind on side A:
To advance the tape, press the button. To rewind it, press the
Fast forward/rewind on side B:
To advance the tape, press the button. To rewind it, press the
Caution:
" To remove the cassette, press the button, and then open the compartment.
" If a power failure occurs during tape operation, the tape head will remain engaged
with the tape and the cassette door will not open. Wait until the power is restored.
" Even if the button is pressed during tape playback, the unit will not enter the
pause mode.
01/1/25 E2.fm
button for side B.
button to switch the playback
button.
button.