Advertisement
4 - Installation Procedure
Always use a certified builder or installation specialist when installing your Firebox. Use only
fire rated materials which adhere to the relevant laws and building regulations in the
country where the installation is to occur and make sure that spacing tolerances are
always adhered to and that the correct insulation materials has been used. Below is an
example of a typical installation.
Adequate support below
Wall Box with opening
below for Burner Fuel Tank
Fire rated timber framework
Framework
Step 1:
Create your Firebox display structure from fire rated building materials with enough
support below for the Firebox to rest on. Your structure must have a vent above and below
the Fireplace, these vents can also be on the side of your structure and hidden out of
sight.
Important:
Insulation must be
securely wrapped
around the Wall Box
before placing inside
opening.
Vent Grill below
Cutout opening size as
per tables in this manual
8
Vent Grill above
Firecheck Plasterboard
Firecheck Fire Related Material
Fascia
Assembly
of Firebox
Wall Box of Firebox
wrapped with insulation
all around the outside
Advertisement
