Download Print this page

Axis T99A10 Repainting Instructions

Positioning unit 24 v ac/dc

Hide thumbs Also See for T99A10:

AXIS T99A10 Positioning Unit 24 V AC/DC

Repainting Instructions

Table of Contents

Need help?

Do you have a question about the T99A10 and is the answer not in the manual?

Page 1 AXIS T99A10 Positioning Unit 24 V AC/DC Repainting Instructions...
Page 2 Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment.
Page 3 AXIS T99A10 Positioning Unit 24 V AC/DC How to repaint the product How to repaint the product Preparations • Mask crucial parts of the product to prevent paint from entering inside. • Clean the areas to be repainted from grease, dust and oil, and pretreat the different parts using applicable methods based...
Page 4 For all variants though, proper cleaning to remove oil, grease and dust is strongly recommended. For more information on the materials used in the product, see its datasheet at www.axis.com Powder coated parts - Using fine sandpaper, remove the original powder coating down to the base material and clean the parts before painting, or use a primer.
Page 5 Repainting Instructions Ver. M1.8 AXIS T99A10 Positioning Unit 24 V AC/DC Date: April 2018 © Axis Communications AB, 2017 - 2018 Part No. T10111376...