Advertisement
4. asseMblY
4.1.
Confirm that all items are present and undamaged. If any parts are missing or damaged please contact the supplier.
4.2.
Fig.1 shows a typical air line installation. The filter is located upstream of the regulator - unless combined - and the lubricator
downstream.
4.3.
Install filter / regulator, before connecting system piping ensure that:
a) gauge is visible
b) regulator control is accessible
c) filter drain is accessible
The inlet on the filter-regulators is at the base of the filter body and the outlets are either side of the gauge.
Note: to ensure air-tight joints use Ptfe tape.
fig.1
5. operatioN
5.1.
regulator - the output pressure control knob must be lifted before turning. turn clockwise to increase and anticlockwise to reduce
pressure. the output pressure will be shown on the gauge. When the required pressure is achieved, push down control knob to lock
and prevent inadvertent alteration.
When setting output pressure always adjust up from a lower pressure - i.e. to adjust from 90psi to 70psi, adjust down to 60psi first,
then up to 70psi..
5.2.
Filter - The bowl should be drained daily to prevent an excessive build-up of water/oil. Regularly unscrew the filter housing from the
regulator body to access the filter for cleaning.
eNviroNMeNt protectioN
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack sealey limited
Parts support for sA2fr.V3 (only) is available. Please log on to
www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
01284 703534
Original Language Version
sales@sealey.co.uk
sA2fr.V3, sA4fr/38.V2, sA5/rG/14.V2
www.sealey.co.uk
issue 2 (H, f) 05/02/18
Advertisement
