Seecode 20263 Manual page 8

Filter consisting of HEPA filter and stainless steel sieve. Easy to clean with water!
II. Precautions before operation:
* Before the use , confirm whether the parts are assemble correctly , especially pay attention to
the filter assembly in the dust box.
* Please charge the unit for the first time after using it or leaving it for a long time. The flashing
light will be steady on.
* Note that it cannot be turned on during charging. It cannot use unless its power is cut
off.
* This product has no waterproof function, please do not suck a lot of water or liquid to avoid
the damage, especially flammable and explosive substances such as chemical solvents or
alcohol.
* Do not inhale highly hot substances (such as burning cigarette butts or hot ash) to avoid
burning the filter or plastic parts to make them lose their filtering function.
*If there is the loudly abnormal sound during the use, you should stop using it immediately to
check if the filter is lost! If the installation is finished , please contact the after-sales department
to confirm the treatment.
* Please put it in a cool place without using it . Do not place it in a position above 60C Celsius to
avoid fire hazard.
III. Instructions for use:
1. Vacuum function:
* Remove the cover first
* Press and hold the vacuum button for about one second, the suction function can be activa-
ted. Equipped with a long suction tube and a brush to match the need of vacuum, you can clean
flexibly.
2. Flashlight and strobe light:
* When using the flashlight, press the light button to turn it on, press again to activate the blin-
ker to keep flashing. long press the button to switch on hazard warning light, and short press to
switch off.
Note: In order to facilitate the use of the flash warning function, this product has a magnetic
suction device inside the cover, it can be stable to put it upside down on the roof or rear of the
car!
| 8 |