COMPASS HEALTH PROBASICS VOYAGER RLAEUWT Manual page 6

SETTING HANDLE HEIGHT ADJUSTMENT
1. Push red height release button on back of the handle.
2. While depressing the button, pull the handles upward.
3. Move the handles upward until the desired height is reached.
4. Release the button and ensure the button snaps into place at
the corresponding hole.
5. Repeat steps 1 through 4 for the second handle so both
handles are at an equal and desired height.
SETTING LEG HEIGHT ADJUSTMENT
1. Push detent button located outside the rear leg.
2. While depressing the button, pull the leg outward to increase
the seat-to-floor height. Push the leg inward to decrease the
seat-to-floor height.
3. Release the button and ensure the detent button fully
protrudes from the corresponding hole.
4. Repeat steps 1 through 3 for the other leg so both legs are
at the equal and desired height.
6