Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KACONMICPHB
Summary of Contents for Kogan KACONMICPHB
- Page 1 USB CONDENSER MICROPHONE WITH POP FILTER & STAND KACONMICPHB...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS • Lower the volume before moving the microphone as loud feedback can occur when the top of the microphone is covered by hands or the microphone is moved near to the speaker. • Take care not to let the microphone fall or suffer physical damage. •... - Page 4 COMPONENTS Shock-proof stand Microphone holder USB audio line Condenser microphone Pop filter Vibration control frame Sponge ball Base...
-
Page 5: Installation
INSTALLATION Connect the base to the shock-proof stand. Hand-loosen the base using the dial on the back to adjust its clearance, then slide it over the installation surface and tighten it to secure. Use the small screw on the bottom to tighten further. Connect the top of the bracket to the plastic shock-proof frame. -
Page 6: Operation
OPERATION Positioning your microphone: This microphone is unidirectional. It is important to position the microphone directly in line with the person speaking or instrument (or other sound source) to achieve the best frequency response of the microphone. The distance from the mouth should be approximately 10 - 40mm for optimal recording. For speaking/singing applications, ensure the diaphragm (small circular piece inside the grille) is facing the user. -
Page 7: Specifications
SPECIFICATIONS Polar pattern Unidirectional Frequency response 20Hz-20kHz Sensitivity -34dB±2dB (0dB=1V/Pa at 1kHz) 150Ω±30% (at 1kHz) Output impedance ≥1000Ω Load impedance Equivalent noise level 16dBA Maximum SPL 130dB (at 1kHz ≤ 1% T.H.D) S/N Ratio 78dB Electrical current... - Page 8 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...