Advertisement
6. Install fan into wall or ceiling using one of the
following methods:
Wall Mount Frame Construction
a. Position between studs with the discharge
pointing up.
b. Fasten fan to studs using screws (supplied by
others) as shown in Figure 5.
Figure 5
Ceiling Mount Hanging Installation
a. Use Greenheck's optional vibration isolation kit.
Using the fold down mounting brackets and
1/4-20 threaded rod (by others) to hang unit as
shown in Figure 6.
1/4 - 20 Threaded Rod
Figure 6
®
7. For wiring the fan remove wiring cover. Bring field
wiring into the junction box. Using proper wiring
connectors, wire the fan as shown in Figure 7.
Push all wiring back into the fans junction box
and replace wiring cover.
Figure 7
8. Connect ductwork by squeezing ductwork and
sliding over the fans discharge, see Figure 8.
Attach the ductwork to the discharge by using a
clamp and seal with approved tape.
A 4-inch round rigid metal outlet duct is
recommended for best results.
Figure 8
Mounting Bracket
NOTE
Wall/Ceiling Exhaust Fan
5
Advertisement
