Advertisement
Quick Links
Advertisement
Summary of Contents for Caldwell Magnum
- Page 1 Product #309713 Instruction #1019113 Safety, Assembly and Usage Instructions...
- Page 2 LOCATION FOR SHOOTING YOUR MAGNUM DUAL SPINNER TARGET: Be sure you have a safe backstop, such as a hill or berm of soft earth. Be sure the area beyond and beside the target is safe and clear. Place the Spinner directly onto firm, level ground. Soft or Muddy ground can affect the function of the product.
- Page 3 ASSEMBLY INSTRUCTIONS: Thank you for purchasing a Caldwell Magnum Dual Spinner Target. Assembly of this product is very easy and requires only a 19mm wrench or socket for the M12 hardware or an adustable wrench may also be used. Please take a moment to locate all of the parts shown in the photo below.
- Page 4 Assembly Steps: 1. Snap one of the E-clips to the groove in the Shaft. (See Photo 3) 2. Slide the Targets and Bracket onto the end of the Shaft up to the E-clip as shown. (See Photo 4) 3. Snap the second E-clip to the shaft to secure the targets (See Photo 5) 4.