Monitor suspension system with adapter to cas 8000 rails (26 pages)
Summary of Contents for Image Diagnostics Compass Product Line
Page 1
Compass Product Line Radiation Protection System Versions may vary from the picture shown. Setup & Operator Manual The text of this manual was originally written, approved, and published by the manufacturer in English. The information and images in this document are proprietary to IDI and is only for use for and by IDI...
Page 2
Image Diagnostics, Inc. certifies only the equipment. After-sale operating practices and safety are the responsibility of the owner and operator. Image Diagnostics, Inc. assumes no liability or responsibility for after-sale operating or safety practices; nor can it be responsible for personal injury or damage resulting from misuse.
There is the potential of exposure to harmful x-rays. Be sure to read and comply with all warnings. Not made with natural rubber latex. Model of Compass Product Line. Serial Number of Compass Product Line. Date of manufacture of the device. Location where device was manufactured. Read the Manual.
Compass Product Line Intended Use The Compass Product Line is a discreet radiation shield barrier protection system which can be attach onto a ceiling suspension or mobile cart suspension platforms. The product line will have initial use for fluoroscopic procedures. The products would be positioned between patient and medical professionals within treatment table work area.
Setup & Operator Manual Compass Product Line Safety Hazards Safety Hazard Level Potential Consequences with Use WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not...
Setup & Operator Manual Compass Product Line 4. EMC (Electromagnetic Compatibility) Statement Portable and Mobile RF Communications Equipment will not affect the Compass Products, which are non-electrical system. No special precautions needed regarding EMC when Compass Products are installed, operated, and maintained.
Setup & Operator Manual Compass Product Line 9. General Cleaning After each medical procedure, Compass Product components and visible contaminated areas should be properly cleaned. Do not use harsh abrasives, solvents, sprays, or corrosive agents. If room is to be disinfected by means of an atomizer, the equipment must be covered with plastic bag or similar sheeting.
Approved cleaner listed above. d) Do not use paper towels, scrub pads, or other abrasive cleaning tools. 10. Service & Repair For repairs or replacement of components, please contact Image Diagnostics for Service and Repair at (978) 829-0009. 11. Maintenance All maintenance procedures should be done by an experienced and qualified technician with demonstrated knowledge and skills (mechanical) in the service of medical equipment.
Setup & Operator Manual Compass Product Line WARNING! Radiation shields require careful handling and periodic testing for safe use. Test upon receipt and at regular intervals to ensure shielding integrity. Test procedure and schedule to be the responsibility of the appropriate department of the facility where used.
Setup & Operator Manual Compass Product Line 14. Label Identification Item Part No. Description Qty. Label Device Serial Number Date Code of Manufactured Unique per Manufactured Compass Products in the Compass Products format of Year-Month LABEL, SERIAL L610-0218 NUMBER, COMPASS...
Setup & Operator Manual Compass Product Line 15. Warranty Warranty details for IDI Products can be obtained directly from Image Diagnostics, Inc. Image Diagnostics, Inc. 310 Authority Drive Fitchburg, MA 01420 USA Or call IDI at (978) 829-0009. L610-0220 REV A...