Advertisement
Quick Links
RECHARGEABLE TOUCH DIMMER LIGHT
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
Avoid locations of high temperature or humidity.
•
On initial use, charge the batteries using the USB socket and USB lead supplied until
the red charge indicator turns blue.
•
For indoor use only.
INSTALLATION
•
Slot the two self adhesive mounting pads into the keyhole slots on the back of the
light, remove the protective tape then offer the lamp up to the surface where required
and press it gently into place.
•
Unhook the light and press the mounts firmly onto the surface then refit the light.
•
Alternatively drill two holes the wall 243mm apart horizontally in the required location
with regard to any concealed wiring or pipework, use wall plugs if required and screw
in two dome head screws leaving the heads 4mm proud of the surface.
•
Locate the keyhole slots in the back of the light unit over the screw heads and ensure
the light is securely fixed.
•
Set the function switch to either ON or AUTO mode.
PELL0017
Advertisement
Related Manuals for Pro-Elec PELL0017
Summary of Contents for Pro-Elec PELL0017
- Page 1 RECHARGEABLE TOUCH DIMMER LIGHT PELL0017 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • Avoid locations of high temperature or humidity. • On initial use, charge the batteries using the USB socket and USB lead supplied until the red charge indicator turns blue.
- Page 2 OPERATION • When set to ON the light will illuminate continuously at approx 120 lumen. No dimmer function is used. • When set to AUTO on first operation the light remains off until you place a finger across the two contact sensors then the light will illuminate. •...