20201009081441_32MKV6000_eng_BOOK Page 101 Friday, October 09 2020 08:19:30 JST
Riding mode
(Continued)
Setting the riding mode
You can change the P, EB, D and T levels on
the USER of the riding mode.
Stop the vehicle.
a
Select the USER in the riding mode.
b
(P.97)
Press and hold the
c
display is flashed.
Select the desired parameter and setting
d
level.
To select the parameter, push the
u
on
To select the setting level, press the
u
or
sel up/down switch.
T level can be changed to off by pressing
u
and holding the
selecting the T parameter.
98
switch until P
MODE
or
sel left/right switch.
sel up switch while
In MT MODE, the T level cannot be
u
changed.
Also, the level is not displayed.
To change between the AT MODE and
MT MODE.
(P.105)
Press and hold the
MODE
e
parameter stops flashing.
You can also change the levels on the USER
of the riding mode in the setting mode of the
instruments.
(P.45) (P.50)
switch until the