Page 1
To ensure smooth operation and long-lasting performance of your new powerpack, we recommend that you study this operating manual carefully Rhino Tool Co. Inc. and pay special attention to 1134 West South St. P.O. Box 111 Kewanee, IL 61443 Safety and Service Tel: 309.853.5555 main...
Page 2
Contents Page Safety precautions ................... 2 Filling up hydraulic oil ..................2 Technical data ....................3 Starting instructions ..................4 Setting of flow ....................4 Service, maintenance and hydraulic settings ............4 Oil types ......................6 Warranty Conditions ..................7...
Page 3
Safety Precautions 1. Always use protective earplugs. The powerpack complies with the EU noise limits, but by daily long-lasting operation there is a risk of hearing defects. 2. Always connect hoses before starting. 3. Never add fuel and oil when the engine is running. 4.
Page 4
The Rhino ® HPP18V FLEX open center hydraulic powerpack is designed in accordance with the EHTMA categories C, D and E, which prescribe a minimum performance of 5 g.p.m., 8 g.p.m. and 10 g.p.m. (20 l.p.m., 30 l.p.m. and 40 l.p.m.) respectively at 2000 psi (138 bar).
Page 5
Starting Instructions Please observe the starting instructions on the front of the powerpack. Start: • Check engine oil level • Check hydraulic oil level at sight glass • Connect hoses and tool • Switch fuel tap to “ON” • Activate choke •...
Page 6
If the pressure/oil flow is then still incorrect, the pump is defect and must be replaced. Oil Types The Rhino ® powerpack uses standard hydraulic oil, i.e. all types of mineral oil and biodegradable oil, which comply with the following values:...
Page 7
(12) months with regard to all other components, excluding the Honda 13 HP engine and Vanguard 18 HP engine for which Rhino provides no warranty and for which the warranty is provided by American Honda Motor Co., Inc and by Briggs and Stratton Corporation respectively and the shall be the sole warranty applicable thereto.
Need help?
Do you have a question about the HPP18V FLEX and is the answer not in the manual?
Questions and answers