Page 1
TRU-LEVEL™ Edge of Dock Leveller INSTALLATION & OWNERS MANUAL PROJECT/CLIENT: SO No: PACKED BY: DATE: CHECKED BY: DATE: INSTALLED BY: DATE: COMMISIONED BY: DATE: (THIS MANUAL MUST REMAIN WITH LEVELLER FOR SERVICING AND MAINTENANCE AT ALL TIMES)
Page 2
TRU-LEVEL™ EDGE OF DOCK LEVELLER INSTALLATION & OWNERS MANUAL • When receiving goods on site, please check all packages immediately for damage or repackaged goods that may have been damaged during shipping. • Any damage must be reported to TRU-BILT Industries Ltd within 24 hours of receiving product.
TRU-LEVEL ™ TL2515/TL3015 INSTALLATION & OWNERS MANUAL Contents Safety Warnings …………………………..…………….…………………………………………………….……….. 3 Installation Instructions .………………………..……..…………………..……..…………………..…… 4 - 7 Operating Instructions ..….………….…………..….…………………………………………….………... 8 - 9 General Maintenance ...….………………….………….……………………………….………….…………….. 10 Troubleshooting ………..….……………………..…...…………………….…………………….…….……….. 10 Warranty …………………………………….…………………………………………..…………..……….………….. 11 Preface • The installation of the TRU-LEVEL Edge of Dock Leveller is reasonably basic if you follow the instructions in this manual carefully.
TRU-LEVEL™ EDGE OF DOCK LEVELLER INSTALLATION & OWNERS MANUAL Installation Instructions Step 1 – Choice of two applications The Edge of Dock Leveller can be installed in two ways: a) Wall mounted directly against a loading dock (See Fig 1.1 and Fig 1.2). For this purpose, the dock must be provided with a mounting edge at the front consisting of an angled section measuring at least 100mm x 100mm with anchors spaced at 150mm centres.
Page 6
TRU-LEVEL™ EDGE OF DOCK LEVELLER INSTALLATION & OWNERS MANUAL b) The leveller can be installed directly into a dock pit (see Fig 1.3). This pit must be equipped with a protective edge consisting of a similar 100mm x 100mm angled section with anchors at 150mm centre to centre.
Page 7
TRU-LEVEL ™ TL2515/TL3015 INSTALLATION & OWNERS MANUAL Step 2 – Installation • Place anchors as specified in Fig 1.2. • The Edge of Dock Leveller is supplied completely assembled. • Remove the steel strips. • Place the leveller on the pit edge by using a forklift and hoisting strap. •...
TRU-LEVEL™ EDGE OF DOCK LEVELLER INSTALLATION & OWNERS MANUAL Operating Instructions • PLEASE NOTE: The leveller should only be used for the purposes for which it is intended, i.e. the loading and unloading of trucks with the aid of forklifts or pallet trucks.
Page 9
TRU-LEVEL ™ TL2515/TL3015 INSTALLATION & OWNERS MANUAL General Maintenance Your TRU-LEVEL dock leveller has been designed for heavy duty use with a minimum of maintenance needed. However it can be damaged if used carelessly so we recommend that you inspect your TRU-LEVEL every 3 months for damage.
TRU-LEVEL™ EDGE OF DOCK LEVELLER INSTALLATION & OWNERS MANUAL General Maintenance To guarantee safe operation, check the Edge of Dock Leveller regularly for correct operation or damage. For repairs and maintenance advice contact Tru-Bilt Industries Ltd. Trouble Shooting PROBLEM CORRECTION Lip remains Check for obstructions or damage.
TRU-LEVEL ™ TL2515/TL3015 INSTALLATION & OWNERS MANUAL Warranty TRU-BILT Industries Ltd warrants that your TRU-LEVEL™ Edge of Dock Leveller will be free from defects in materials and workmanship under normal use for a period of two years, provided the purchaser installs, maintains and operates the Edge of Dock Leveller in accordance with this owner’s manual.