Table of Contents
Advertisement
1. Introduction
The i5 infrared beams are designed to provide optimum
safety by detecting the presence of a person or vehicle
traversing the path of a moving gate or door. The beams can
be interfaced with most automation equipment. They can
also be used to enhance the security of the automation by
enabling the Intruder Detection Alarm function inherent in
many of our later gate operator controllers, as well as
external alarms and buzzers by means of either a
normally-open or normally-closed potential-free contact.
2. Safety Instructions
1.
All installation, repair, and service work to this product must
be done by a suitably qualified person.
2.
Do not in any way modify the components of the system.
3.
Do not leave packing materials (plastic, polystyrene, etc.)
within reach of children as such materials are potential
sources of danger.
4.
Dispose of all waste products like packaging materials,
according to local regulations.
Centurion Systems Pty Ltd does not accept any liability
5.
caused by improper use of the product, or for use other than
that for which the automated system was intended.
6.
This product was designed and built strictly for the use
indicated in this documentation. Any other use, not
expressly indicated here, could compromise the service
life/operation of the product and/or be a source of danger.
7.
Anything not expressly specified in these instructions is not
permitted.
Advertisement
Table of Contents
Need help?
Do you have a question about the i5 and is the answer not in the manual?