Page 2
Technical specifications System properties Contact inputs Voltage 30VAC of 30VDC max Impedance 10k pull-up to 12VDC <2V >2.5V Note Input can be a contact to GND or a voltage Relay contacts Max load 30VDC / 1A, 30VAC / 1A (resistive load) I/O bus Cable type RS485 Modbus cable (22AWG), see chapter 2.2 for further explanation Length...
Page 3
I nstallation 2.3. Slave ID The EM-8001 works with a master/slave structure, in which the 2.1. Mounting the external module (EM-8001) Octalarm-Touch acts as the master and the EM-8001 as the slave. The EM-8001 can be mounted to the wall and to 35 mm DIN rails. Slaves must have a unique Slave ID.
Page 4
Molenweer 4 +31 174 794022 2291 NR Wateringen www.adesys.nl The Netherlands info@adesys.nl More information on the website...
Need help?
Do you have a question about the Octalarm EM-8001 and is the answer not in the manual?
Questions and answers