Page 7
The following instructions are in english. Localized versions can be found with the QR-code below. guide.danalock.com...
Page 8
Danalock V3. Go to: Menu > My Accessory Devices > [Danabridge name] > Pairing Select the lock you want to control with the Danabridge V3. Connect the Danabridge V3 to wifi Go to: Menu > My Accessory Devices > [Danabridge name] > Wifi Select your access point and enter the credentials.
LED-Signals The Danabridge V3 indicates the status of several operations with different colors: LED signal LED color Status indication Long white blink Power on Constant red light Danabridge offline Yellow blinking Danabridge is not configured Red blinking Danabridge no server connection...
Firmware upgrade Go to: Menu > My Accessory Devices > [Danabridge name] > Firmware and press ”Upgrade firmware”. Make sure to keep your phone near the Danabridge V3 during the entire firmware upgrade process.