Table of Contents
Advertisement
5. Installation
5.1 Installation Note
In order to ensure the best detection and LoRaWAN
recommended to install AM100 series as follows:
There should not be any isolates or barriers in PIR and light detection range.
Do not mount the device where the temperature is below/above operating range and
temperature varies greatly.
Stay far away from any heat source or cold source like oven, refrigerator.
Do not mount the device close to where airflow varies greatly like windows, vent, fan
and air conditioner.
Do not mount the device upside down.
Do not place the device right to the window or door. If you have to, you'd better pull the
curtain.
It is recommended to install at least 1.5m high from floor.
5.2 Wall Mounting
1. Attach the mounting sticker to the wall.
2. Mark the wall where the two mounting holes are according to the sticker's mark (around
88mm).
Note: The connecting line of two holes must be a horizontal line.
3. Drive two screws into wall at the marks using screw driver.
4. Mount the device on the wall.
6. Milesight IoT Cloud Management
AM100 series sensors can be managed by Milesight IoT Cloud platform. Milesight IoT
cloud is a comprehensive platform that provides multiple services including device remote
management and data visualization with the easiest operation procedures. Please register
a Milesight IoT Cloud account before operating following steps: cloud.milesight-iot.com.
www.milesight-iot.com
AM100 Series User Guide
®
communication effect, it is
19
Advertisement
Table of Contents
