TAKARA TA4560 Installation Manual

ドライ・ウェーブ
Installation Manual for
Constructor
WARNING
● Make sure to install the base/bracket in places
where sufficient strength can be secured.
● Do not install near flame or hot surfaces, such as
a stove.
● Install this product in a dry place where it will not
interfere with air conditioners or gas and fire alarm
sensors.
■ Installation
Base Installation Instruction
45
1
Celling
Base
2
Celling
mounting
screws ４ × ５ ０
Base Cover
3
Installation method for inclined ceiling
Align to the direction
of the inclined ceiling
and the holes on the
base then attach
them to the frame.
TA4560/TA6090
R
This symbol indicates that minor injury
of damage to property is possible.
Installation Instructions
Ceiling Mounting
Screws ４ × ５ ０
Celling
Joist
Celling
Surface
■ When mounting on wooden
ceiling base
※The included mounting screw (φ4X50)can be used.
❶Please check the specifications of the
celling.
❷Use a driver and use proper fastener to
mount the base on your ceiling.
❸Once you have mounted the base firmly,
put the base cover on.
Dimension
40
10
56
Hanging Set
Appreciate for choosing our product Room Laundry
Pole .
Please read this manual before installation.
Please give this manual to the user after installation.
NOTE
● This product is for indoor use only.
● Do not install in a place that impedes the movement
of people, such as an emergency exit.
● Do not disassemble or remodel.
Joist or
Wood
Thickness
(More
than 9mm)
■ When mounting on a
light ceiling base
Installation Layout
45
φ66
22
Base ・ Base Cover
70
15 20
Wall Hooks
86
TA6090
TA4560
56
Hooks
Room Laundry Pole
This symbol indicates that minor injury or
damage to property is possible.
※The screws included with this
Ceiling Mounting
product cannot be used. Please
Screws ４ × ５ ０
purchase appropriate screws.
Celling
Surface
■When mounting on a
concrete base
WARNING
Please do not use electric power tools
only. Be sure to stop before the end of
the tightening or the screws and use
a hand tool to screw tightly.
When your ceiling base is made with
either light base or concrete, please
consult a specialist.
How to install wall hooks
Attach the wall hook to the
Maximum
wall using the mounting
Base Angle
screws as shown below.
Up to 35°
※This product should be installed in
areas like the framing beam.
35°
Etch a pilot hole
on the hook.
PARTS
Base
Base Cover
Floor Surface
Celling Mounting
Screws 4×50
Hanging Set
A
B
Wall Hooks
900 600
Wall Hooks Mounting
600 450
Screw 4×16
Hook
Manual for User
and Constructor
Anchor plug (optional)
Fixing the hook
The Specification-
Name
number Material
ABS Resin
ABS Resin
SUS
AL etc.
ABS Resin
Double Faced Tape
SUS
ABS Resin