ドライ・ウェーブ
Installation Manual for
Constructor
WARNING
●Use exclusively for drying clothes.
●Do not install this product on the outside of
handrails.
●Do not install this product around the exit areas or
any fire defense equipment.
●Be careful not to drop the parts and tools when
installing the product from at height level.
Approx. Weight 30kg (per set)
Installation
1.Position the hardware into the pilot hole,
while carefully attaching the fastener in a
vertical position.
※Fastener (screws, bolts, and anchors) are
optional.
2. Push the knob in and slide the slide beam
into the hardware.
※Adjust the slide beam caps towards you
so that the slide beam can be inserted.
3. Shift the slide beam cap in the direction of
the arrow and tighten the screw again.
4. If you cannot obtain 650mm minimum
height from the ground or the wall struts,
adjust the sliding beam until the minimum
distance is met.
5. Please double check to make sure that
the arm moves smoothly.
2
3
Sliding
Beam
Cup
Metal
fitting
for wall
Public Housing Installation Standard
Operating
Knob
Foothold
SF type
R
This symbol indicates that minor injury
of damage to property is possible.
1
Metal Fittings
Dimension
35.7
11
4
Stopper
Metal
fitting
for wall
Please keep the
device a minimum
of 650mm above
the ground or
bottom of the wall
struts.
If you don t have
Secure dimension of
more than 650mm
enough space,
Floor
rearrange the
position of the
stoppers to
provide at least
650mm above the
ground.
Adjustable Metal Laundry Pole Holder
for Retaining Wall
Appreciate for choosing our product Metal Laundry
Pole Holder for Window Wall .
Please read this manual before installation. Please give
this manual to the user after installation.
NOTE
● Determine the point to install after proper discussion with the
customer.
● Grasp inside structure of the building and condition of the wall
perfectly, install by fastener capable of holding strength.
● The inundation to the fastener part which was installed is
assumed.
When you made holes on the exterior wall when installation,
fill the hole with a waterproof sealing agent to prevent from
the inundation.
● The adhesion of dust and dirt influences the movement and
sound of upward and downward operation.
● Make sure to adjust tightening torque when electric drills are
used. Using impact drills is strictly prohibited.
Mounting Dimension
SF55
(SF45) 〈 SF35〉
537 (455) 〈 373〉
137
30
■ PARTS
Name
Body
Manual for User
and Condition
■ Construction
Cover
Please keep the packing
bag over the items to
keep in good condition
until usage.
※Make sure
to bind with
a string or a
tape.
This symbol indicates that minor injury or
damage to property is possible.
SFL55
(SFL45) 〈 SFL35〉
537 (455) 〈 373〉
137
30
Diagram
The number Specification-Material
Aluminum die-casting
2
Polypropylene resin
1
■ Fitting Parts
For Concrete Wall
Model No. DRY-06-05
Anchors for M8 (4 pc.) Washers for M8 (4 pc.)
Hexagon bolts M8X25 (4 pc.)
For Wooden Wall
Model No. DRY-06-14
Model No. DRY-06-02
Hexagon Coach Screws
Hexagon Coach Screws
φ8×90 (4pc.)
φ6×75 (4pc.)
Washers φ8 (4pc.)
Washers φ6 (4pc.)
□For Support Beams 50 (Transfixion)
Model number: DRY-06-06
Hexagon bolts M8×80 (4pc.) Hexagon nuts for M8 (4pc.)
Washers for M8 (8pc.)
Spring washers for M8 (4pc.)
□For Support beams 70 (Transfixion)
Model number: DRY-06-07
Hexagon bolts M8×100 ( 4pc.) Hexagon nuts for M8 (4pc.)
Washers for M8 (8pc.)
Spring washers for M8 (4pc.)
171117