1. Upper Case Unit
2. Printer Mechanism
(1) Turn off the powerswitch, disconnect the
power cord from the wall outlet
(2) Remove
• Three screws 1
• Upper case unit 2
• Front cover unit 3
• Connector 4
(1) Remove
• Upper case unit according to the proce-
dure described in Section 2. 1
• Two screws 1
• Document table 2
• Move the lever down as shown by the
arrow in the illustration, then pull the
document table out to the left.
• Four screws 3
• Four rubber sheets 4
• Flat cable 5
• Three connectors 6
• Printer mechanism 7
— 10 —